Friday, May 15, 2020

Analysis Of The Biography Devin Booker - 1246 Words

Devin Booker was born in Grand Rapids, Michigan, on October 30, 1996. He was born to Melvin Booker and Veronica Gutierrez. His father, Melvin Booker, was named the 1994 Big Eight player of the year while point guard at the University of Missouri. Booker was in Michigan, while his father was pursuing a professional career overseas. Devin visited his father two months out of the year while he was on summer break. At an early age, Devin was taught by his father that having a basketball IQ was more important than natural athleticism. While Devin was in Michigan, he had played for the freshman, junior varsity, and varsity basketball teams at Grandville High School, in Grand Rapids. But Booker then moved to Mississippi, to live with his father, after his retirement from professional basketball. He had then enrolled into Moss Point High School, where his father was an assistant coach, in August of 2011. Early on Booker was a high school standout. As a sophomore he had developed into one of the best guards in the coastal area of the gulf. He had averaged 22.7 points per game. He also had been drawing interest in Mississippi State, Ole Miss, Georgetown, Florida, Georgetown, Alabama, and Missouri. Later that season Devin scored 54 points in the MLK shootout. With Devin’s sophomore season now over, it was now time for his junior campaign. With most of Moss Point’s experienced players graduating, Devin switched to the point guard position for his junior season. But later in the season

Wednesday, May 6, 2020

The Effects Of Canned Food On People s Health - 1414 Words

The Negative Effects of Canned Food on People s Health Zamzam Albulushi Ohio University Canned food is processed in order to increase the shelf life of certain products. It can be used to offer support to people in inaccessible areas such as military bases or people may use it at home to prepare the cooking processes easier (Callahan, 2011). While canned food has numerous benefits, increasing concerns are beginning on the safety and health implications of food with a shift from earlier concerns on the sanitation of canneries. The poor health and sanitation challenges initially associated with canned food have been progressively eliminated. This happened with the help of introduction of standards, which resulted in technology increasing efficiency and quality associated with production. Health challenges present the leading concern over canned food with matters ranging from the salt content to botulism all that have varied health implications. The chemicals associated with the packaging of food including BPA (bisphenol A) are used in the lining of food cans with the int ention being the cushioning of the can’s content and the metallic part of the can (Callahan, 2011). An additional negative impact linked with canned relates to the leakages of aluminum through the cans and thus contaminate the food as will be discussed. Because of the packaging, canned food may have a negative influence on health and may lead to health issues such as cancer, botulism,Show MoreRelatedHealth Of Health And Nutrition1654 Words   |  7 Pagesmillions of people are at risk because they haven’t learned the basic steps of maintaining their health. Lack of health management it a big part in deaths today. Health and nutrition is a serious matter among peoples health. Being able to understand and maintain is a big problem now for teens and kids, choosing on the right foods or activities to keep everything in track. health and nutrition can also have a great effect on their Read MoreThe Harmful Effects Of The Body997 Words   |  4 PagesWhat is rarely thought of is plastic, food, or even water. Many people are unaware of harmful chemicals that are in everyday items. It is important to be aware of what enters the body because the side-effects can be harmful and in some cases deadly. Certain chemicals are not only harmful to the current generation, but also to future ones. Avoidance is only possible with knowledge of the dangers chemicals found in common goods present. Every single day people use, ingest or come in contact with chemicalsRead More Buying Local Foods is Better Essay1637 Words   |  7 Pageswhat is in the food you are feeding your children? Most foods that are bought at the neighborhood grocery stores are considered global foods which are packed with additives and chemicals making them far less nutritious than local produce from the community farmer‘s market. After much research, I have concluded that it is better to buy produce which is grown locally rather than produce which is sourced globally (from other countries). I think this is important because most people, like myself, buyRead MoreHealth Of Health And Nutrition1646 Words   |  7 PagesIn America millions of people are at risk because they haven’t learned the basic steps of maintaining their health. Lack of health management it a big part in deaths today. Health and nutrition is a serious matter among peoples health. Being able to understand and maintain i s a big problem now for teens and kids, choosing on the right foods or activities to keep everything in track. Health and nutrition can also have a great effect on their social life. Health and nutrition is a important thingRead MoreFood Foods And Its Effects On Health And Lifestyle1307 Words   |  6 Pagespurchase canned vegetables or if they should walk to the produce department and instead purchase fresh vegetables. The deciding factor in that moment should be the healthier option. Why would they consider consuming the processed foods when the produce is clearly the healthier choice? For most Americans the answer is not that simple. Processed foods are the quick, inexpensive,and enjoyable way to satisfy hunger cravings. The act of processing foods consists of changing or altering a food product beforeRead MoreHomemade Spaghetti Sauce Is Cheaper From Scratch Or From A Dish?1940 Words   |  8 Pagesrather than buying a mix or packaged food item. This works well in many cases, but in others, it s actually cheaper to buy the pre-packaged item. Recently, I decided to look at whether spaghetti sauce is cheaper from scratch or from a can. Canned vs. Homemade Sp aghetti Sauce: Price Looking at price alone, it s actually an easy call. At Winco Foods, I bought 26.5-ounce can of Del Monte Mushroom Spaghetti Sauce for 78 cents. At most stores, in fact, I can find canned spaghetti sauce for one dollarRead MoreFood Processing And Food Preparation1550 Words   |  7 Pagesimportant to note the difference between food processing and food preparation. Food processing in this context primarily refers to the commercial, industrial sense – a series of scientific and technological processes implemented; changing foods from their raw state to extend its shelf-life or enhance its flavours through use of preservatives, food additives and other substances. In this way, the natural decaying process is slowed down and the eating quality of the food is customized in an expected and fixedRead MoreRussell County Coalition Case Analysis1526 Words   |  7 Pageswithin Russell County, Kentucky. These resources include clothing, canned, and dry goods found within local food banks and clothing from church ran clothing centers. It is the mission of the Coalition to improve the quality of life for low-income individuals in the Russell County, Kentucky area. The program will do this by assisting low-income individuals and families within Russell County with food, and clothing and transport the food and clothing to individuals and families in need that do not haveRead MoreThe World Is Witnessing A Food Revolution1216 Words   |  5 PagesThe world is witnessing a food revolution. Man s way of producing food has evolved from hunting and gathering to conventional farming, to now using genetic engineering to produce GMOs, otherwise known as Genetically Modified Organisms. Genetically modified foods are a topic of controversy among many in the United States and around the world today. Debates arise regarding the use of GMOs and the safety of them, but what exactly is a GMO? GMOs are crops whose genes have been artificially manipulatedRead MoreThe Health Implications Of Food Foods1296 Words   |  6 Pagesprocessed foods at fast foods restaurants. People do not have to go far to find one. They are conveniently accessible throughout America. These chain restaurants have redefined the definition what a meal consist of, and therefore, have helped contribute to a society of unhealthy people addicted to processed foods. In order to create a society of healthy individuals, people need to alter their eating habits in a positive way by developing a greater understanding of the negative effects these fast

Tuesday, May 5, 2020

A Dream Deferred Essay Example For Students

A Dream Deferred Essay While Langhston Hughes authors this poem, A Dream Deferred, it can easily be interpreted as Toni Morrison s description of Nel and her life of sorrow and dissatisfaction. Sula and Nel, the protagonists in Toni Morrison s Sula, are each the only daughters of mothers whose distance leaves the young girls with dreams to erase this solitude and loneliness. There is no question that Sula alleviates this aloneness with a lascivious and experimental life, â€Å"I m going down like one of those redwoods. I sure did live in this world†(143). Nel, however, for the most part, fails terribly at realizing her dreams and experiencing a happy existence. Compromising her individuality, her emotional stability, and her dreams mark Nel s banal and unfulfilling life. Early in Nel s life during a trip to New Orleans, she watches as her mother is humiliated by a train s white, racist conductor; she watches the indignity of her mother s having to squat in an open field to urinate while white train passengers gaze; and she watches her mother s shame at her own Creole mother s libidinous lifestyle. Her mother s submissiveness and humiliation evokes a fear, an anger, and an energy in Nel. Her emotions intensify as she makes a declaration to never be her mother, to never compromise her individuality, â€Å"I m me. I m not their daughter. I m not Nel. I m me. Me†(28). Figuring that her â€Å"me-ness† will take her far, she exclaims â€Å"I want I want to be wonderful†(29). However, that trip to Louisiana â€Å"was the last as well as the first time she was ever to leave Medallion†(29). Initially, Nel s self-declaration empowers her to pursue that dream of independence. She gathers power and joy, and â€Å"the strength to cultivate a friend in spite of mother†(29). Nel achieves a degree of her self-described â€Å"me-ness,† her dream, a separation from her subservient and disgraceful mother, resulting in a new found complacency, â€Å"Nel, who regarded the oppressive neatness of her home with dread, felt comfortable in it with Sula†(29). This happiness was present in both girls, â€Å"Their meeting was fortunate for it let them use each other to grow on†(49). Unfortunately, as she left Medallion only one time, Nel would discover and enjoy this â€Å"me-ness† only one time. With her marriage to Jude, Nel abandons any dreams of â€Å"me-ness†. She is chosen as Jude s wife, a sign of ownership or possession; she does not choose to be Jude s wife. Nel hopes that Jude s dreams â€Å"of being taken (for a job on the road crew). Not just for the good money, more for the work itself†(81) and that â€Å"he wanted someone to care about his hurt†(82) will become hers, â€Å"She seemed receptive, but hardly anxious†(82). However, by trying to accommodate and understand Jude s desires and hurt, she must compromise her own dreams of individualism. Therefore, Nel is forced, although she never openly objects, into the role of a housewife. Against all of her dreams, she has become the dreaded role of her mother, a traditional black housewife contented by children, her husband, and whatever the townsfolk deemed proper and acceptable. This transformation into her mother exemplifies Nel s loss of individuality. In fact, Nel s independence dissolves to the extent that she cannot recognize herself, â€Å"She didn t even know she had a neck until Jude remarked on it, or that her smile was anything but the spreading of her lips†(84). Even Toni Morrison admits that Nel has lost her â€Å"me-ness†, â€Å"The two of them together would make one Jude†(83). When Jude leaves, after his betrayal with Sula, Nel suffers emotional torment and further problems from her failure to achieve â€Å"me-ness†. It is at this juncture in the work that Toni Morrison employs a unique image to represent Nel s dream: The mud shifted, the leaves stirred, the smell of overripe green things enveloped her and announced the beginnings of her very own howl. The odor evaporated; the leaves were still, the mud settled. And finally there was nothing, just a flake of something dry and nasty in her throat. .u3e8134384dbb789c98be753c57732905 , .u3e8134384dbb789c98be753c57732905 .postImageUrl , .u3e8134384dbb789c98be753c57732905 .centered-text-area { min-height: 80px; position: relative; } .u3e8134384dbb789c98be753c57732905 , .u3e8134384dbb789c98be753c57732905:hover , .u3e8134384dbb789c98be753c57732905:visited , .u3e8134384dbb789c98be753c57732905:active { border:0!important; } .u3e8134384dbb789c98be753c57732905 .clearfix:after { content: ""; display: table; clear: both; } .u3e8134384dbb789c98be753c57732905 { display: block; transition: background-color 250ms; webkit-transition: background-color 250ms; width: 100%; opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #95A5A6; } .u3e8134384dbb789c98be753c57732905:active , .u3e8134384dbb789c98be753c57732905:hover { opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #2C3E50; } .u3e8134384dbb789c98be753c57732905 .centered-text-area { width: 100%; position: relative ; } .u3e8134384dbb789c98be753c57732905 .ctaText { border-bottom: 0 solid #fff; color: #2980B9; font-size: 16px; font-weight: bold; margin: 0; padding: 0; text-decoration: underline; } .u3e8134384dbb789c98be753c57732905 .postTitle { color: #FFFFFF; font-size: 16px; font-weight: 600; margin: 0; padding: 0; width: 100%; } .u3e8134384dbb789c98be753c57732905 .ctaButton { background-color: #7F8C8D!important; color: #2980B9; border: none; border-radius: 3px; box-shadow: none; font-size: 14px; font-weight: bold; line-height: 26px; moz-border-radius: 3px; text-align: center; text-decoration: none; text-shadow: none; width: 80px; min-height: 80px; background: url(https://artscolumbia.org/wp-content/plugins/intelly-related-posts/assets/images/simple-arrow.png)no-repeat; position: absolute; right: 0; top: 0; } .u3e8134384dbb789c98be753c57732905:hover .ctaButton { background-color: #34495E!important; } .u3e8134384dbb789c98be753c57732905 .centered-text { display: table; height: 80px; padding-left : 18px; top: 0; } .u3e8134384dbb789c98be753c57732905 .u3e8134384dbb789c98be753c57732905-content { display: table-cell; margin: 0; padding: 0; padding-right: 108px; position: relative; vertical-align: middle; width: 100%; } .u3e8134384dbb789c98be753c57732905:after { content: ""; display: block; clear: both; } READ: Dream School EssayShe stood up frightened. There was something just to the right of her, in the air, just out of view. She could not see it, but she knew exactly what it looked like. A gray ball hovering just there. .. Quiet, gray dirty ball. A ball of muddy strings, but without weight. She knew she could not look (109) This passage illustrates Nel s anguish and feelings of failure. The motion and progress of the mud and the leaves in the first paragraph as well as the odor of â€Å"green overripe things† represent the hope and action that Nel once had with her â€Å"me-ness†. Additionally, the â€Å"howl† parallels Nel s former readiness and energy to commence her journey for individuality. However, as the â€Å"odor evaporated†, â€Å"leaves were still†, and â€Å"mud settled†, so does Nel s dream fester like a sore. Until there is nothing left, except a harsh reminder of what once was, â€Å"something dry and nasty in her throat†. Once again she is frightened as she was when she watched her mother s humiliation and submissiveness and made her bold self-declaration of â€Å"me-ness†. This time, however, she is scared that her dream is lost, but she can sense that it still exists although she cannot see it. It is a â€Å"gray dirty ball† with a little substance, but â€Å"no weight†. The ball corresponds to her dream, which still survives, but her dream is nearly dead, with â€Å"no weight†. Twenty-five years later after Sula s death, Nel realizes that she allowed herself to defer her dream until it is too late. Once again, Morrison, utilizes a gray ball with images of leaves and mud to establish the death of Nel s â€Å"me-ness†. â€Å"Leaves stirred; mud shifted; there was the smell of overripe green things. A soft ball of fur broke and scattered like dandelion spores in the breeze†(174). Finally, the dream explodes, and Nel can only reflect. She has wasted opportunities for self-discovery and happiness while her closest friend experienced individuality and joy. After visiting Sula s grave, Nel grasps how crucial Sula was, and how much she coveted Sula s company and lifestyle. As the story closes with her dreams only a figment of her childhood with Sula, Nel breaks down, â€Å"It was a fine cry-loud and long- but it had no bottom and it had no top, just circles and circles of sorrow†(174). Nel had lived like the book ends with â€Å"circles and circles of sorrow†, like a dream deferred.

Wednesday, April 15, 2020

Meteorite or Puck Hunt Autonomous Mobile Robot

Advertising We will write a custom report sample on Meteorite or Puck Hunt: Autonomous Mobile Robot specifically for you for only $16.05 $11/page Learn More Introduction The creation of the autonomous mobile robot (AMB) project is the most important branch of the unit, HES 1305 ROBOTICS AND MECHATRONICS PROJECT 2. The plan, design, building, programming, testing, as well as debugging the different components of the project, would involve teams which consist of three members. The purpose of the autonomous mobile robot would be to travel through a maze while avoiding going over the wall of the maze. In addition, the AMB would also be required to look for certain types of â€Å"pucks or meteorites† that would be identified by their colours, in a mission, which is simulated, in Antarctica. As a result of the intricacies of the predicted settings, the AMB would be required to carry and place the meteorites or pucks in their respective base camps; they should not be thrown or rolled on the ground. In addition, the robots would not be allowed to get rid of unwanted pucks from the camps, or destroy other robots. The project is in fact a competition pitting different teams against one another. Each team would provide one robot in the competition area to collect as many meteorites and place them in the specified camps. The teachers and staff of Swinburne University provided all the sensors, LEGO parts, software, and actuators. The Method Of Design Design Philosophy One vital building block of artificial intelligence involves creation of a robot that has the ability to function under diverse and indeterminate environments, while under partial supervision. The Development of the Design Being the first time that we are taking part in this type of competition, we decide to work out a plan that would help us develop the autonomous mobile robot in the given surroundings.Advertising Looking for report on other technology? Let's see if w e can help you! Get your first paper with 15% OFF Learn More The most important part of the design involved coming up with a solution that would help the robot grab and flip over the meteorite or puck. After that, we had to go backwards with the intention of building a structure that could support all the equipment, actuators, and sensors, in order to produce a practical robot in the contest atmosphere. Design Process Hardware Part – (Name of Team member who handled this part) Handy board Autonomous robot control is usually attained by means of a Handy Board [Martin 2001]. The Handy Board was found to be a battery-powered and hand-held microcontroller board. It was perfect for both educational and personal robotics projects. It was based on the structure and functions of the Motorola 68HC11 microprocessor. Figure I The Handy Board contained the following parts: Processor: Motorola 68HC11 8-bit microcontroller with 2MHz speed RAM: 32KB battery-backed fixed RAM Scree n: 16Ãâ€"2 character LCD display unit Four 1A motors support 6 Servo motor controllers 9 Analog and 7 Digital inputs 16 Analog and 8 Digital outputs Infrared I/O capabilities Serial interface capacities Sound output 11cm x 8.5cm x 5.25 cm (L x W x H – with LCD screen, expansion board, and battery) Figure IIAdvertising We will write a custom report sample on Meteorite or Puck Hunt: Autonomous Mobile Robot specifically for you for only $16.05 $11/page Learn More The Handy Board manages Interactive C (IC). The Interactive C is a custom-made version of ANSI C programming language. Interactive C is the most widely held compiler software that is made use of with the Handy Board. In addition, the Interactive C software is a multi-tasking compiler; it has a user command line that is used for dynamic expression evaluation and compilation (Martin, 2001). The IC is sustained by the Kiss Institute for Practical Robotics (KIPR). The figure above (figure II ), demonstrates the running of the IC compiler on Windows XP. Procedure followed for programming the Handy Board using Interactive C Step 1: The Handy Board was connected to the computer using either the Serial Interface or the USB. Step 2: The wall adapter was then used to supply power to the Handy Board. Step 3: Afterwards, the Interactive C compiler software was launched on the computer. Step 4: The board was then initialized with firmware. This was achieved by holding Handy board in a unique bootstrap download mode and then clicking on the download firmware found on the tools menu of the IC compiler software.Advertising Looking for report on other technology? Let's see if we can help you! Get your first paper with 15% OFF Learn More Step 5: After completion of downloading the firmware, the Handy Board beeped, and the Interactive C welcome message appeared on the LCD screen of the Handy Board. This means that the Interactive C is now ready for use. After finishing configuring the system, we are now ready to write the necessary programs using Interactive C IDE software. Then later, we would compile it, and after that download it on to the Handy Board that will run that program. Sensors Each LEGO kit was supplied with the following sensors: Item Quantity Red LED 1 Blue LED 1 Phototransistor 4 Servo Motor 1 IR(Infra Red) Emitter/Detector 2 Micro switch 4 Combined Lego Motor Gearbox 4 Potentiometer 2 IR Range Finder (Sharp GP2D02) 1 Shaft Encoder 2 Table I Out of all these sensors, our interest and use will be limited to Combined Lego Motor Gearbox, Micro switch, Shaft Encoder, Phototransistor, LEDs, as well as IR Emitter/Detector. LED is the short form of a light-emitting diode. Just lik e the name suggests, an LED is basically a diode that gives off light. The difference between LEDs and other incandescent bulbs: LEDs are different from ordinary incandescent bulbs in the sense that they are short of a filament, which burns out. As a result, they do not get especially hot. They are solely lighted up by the motion of electrons in a semiconducting material. In addition, they could last as long as a typical transistor. Advantages: The use of LEDs endows the user with a number of advantages in comparison to the use of regular incandescent sources of light. Some of these advantages include enhanced robustness, lower consumption of energy, longer lifetime, greater durability, smaller size, improved reliability and faster switching (Jones, Flynn Seiger. 1999; Papert Harel, 1991). How LEDs work? Figure III When an LED is switched on, i.e. forward biased, electrons in the PN Junction are capable of recombining with the holes found within the device. As a result, energy is released in the form of photons. Consequently, the energy gap of the semiconductor has some bearing on the colour of the light, or the wavelength of the radiation. This is to mean that doping has some bearing on the wavelength of the Electromagnetic radiation which will be given off. In general, light-emitting diodes are usually made from substrates of Aluminium-gallium-arsenide (AlGaAs). From Electromagnetic spectrum, the wavelength for red is normally between 620 and 750 nm, while that for blue is between 450 and 475 nm. In other words, Red LED and Blue LED means that their doping components are such that the emitted wavelengths range between 620 and 750 nm, and between 450 and 475 nm in that order. Figure IV LEDs have two major uses; visual indicators and light emitters. As visual indicators, they detect the presence of things. When used as light emitters, they are usually detected by other detectors, such as phototransistors and photodiodes. Interestingly, they can be used as narrow band light sensors. Here, they operate in the reverse-bias mode. They act in response to incident light as opposed to emitting light. Phototransistor: Figure V A phototransistor can be described as a transistor that operates differently from common transistors. Unlike common transistors, whose operation modes are under the control of the applied input voltage, the operation mode of the phototransistor is can be directed by light, or the wavelength of the light. The structure of a phototransistor varies from that of a common transistor, at least in two distinct ways; While the phototransistor has a transparent window that allows light to shine on the junctions, ordinary transistors do not have such windows. An ordinary transistor has more surface area than a phototransistor, hence is able to maximize the area of light capture. When the junction is struck by light photons, there is formation of a base current. As a result, the received power is converted into a collector cur rent by the phototransistor. The phototransistor that comes with the LEGO kit has its peak response at 850 nm and its spectral sensitivity is higher than 30 per cent for light radiation that ranges between 6oo nm and 900 nm. The achievement of different gain and frequency of operation (bandwidth) is dependent on the amplifiers, or circuits, formed with these phototransistors. The positive thing that is exhibited is that the frequency and gain response is reliant on the light and its wavelength. Infra Red (IR) Emitter/Detector: The infrared emitter or detector is a circuit that is created using LEDs and phototransistors (Martin, 1994). The purpose of the IR emitter/detector is either to give off or to detect infrared radiation. An extremely fundamental infra red emitter/detector circuit is shown and described below. Figure VI This custom made circuit has one disadvantage; the use of this custom made circuit means that the ambient infra red light would constrain its detecting devices (Martin, 1994). The IR emitter/Detector that came with the LEGO kit had its peak response at 940 nm, with peak sensitivity for about 880 nm wavelengths. The IR Emitter/Detector has found many uses in robotics; it can be used for colour detection, transmitters, motion detection, obstacle detection, and encoders. Shaft Encoder: Shaft encoders can also be referred to as rotary encoders. In essence, it is an electro-mechanical piece of equipment that translates the total amount of mechanical rotation, or angle, into a corresponding amount of current (Sutton Barto, 1998). As a result, knowledge in relation to the amount of current offers information regarding the amount of rotation of the shaft, or the wheel connected to the shaft. In general, there exists, two kinds of shaft or rotary encoders; Absolute shaft encoders These types of encoders are the ones that provide us with information regarding the complete angle of rotation of the shaft. The digital type of absolute shaft encode rs generates distinctive digital code for each different angle of the shaft. There exist two fundamental kinds of absolute digital rotary encoders. These are optical encoders and mechanical encoders. Incremental shaft encoders These types of rotary encoders are the ones that provide us with information regarding the angles or rotations with regard to their previous states. The angles of rotation that are provided by the shaft encoders are in coded form. The two available and most popular methods used for encoding are Gray encoding and standard binary encoding. It is worth noting that for all advanced jobs, which involve the rotation of the wheel, there must be a feedback mechanism that comes from the wheels. As a result, it is vital that the control program is aware of the extent to which the wheel would rotate to with the intention of either altering the speed of rotation of the different wheels, or simply making sure that the vehicle is motionless and no unknown force is acti ng on it. This is basically the reason why shaft encoders are employed. Micro switch: Figure VII A micro switch can also be referred to by its technical name, miniature snap-action switch. As implied by its name, the micro switch is a switch that calls for a comparatively miniature movement of the actuator button, with the intention of producing a relatively large amount of high velocity motion of the electrical contacts in spite of the speed of actuation. Micro switches are popular and their use is widespread. This is attributed to their relatively low cost, as well as high durability. They undergo more than one million cycles; for heavy duty models, this may go up to ten million cycles. There are many places and gadgets that require micro switches for proper functioning. Some of these areas include machinery, vehicles, industrial controls, appliances, and numerous other areas for control of electrical circuits. Some common but particular areas where micro switches are employed in clude the door interlock systems on microwave ovens, safety and levelling switches in elevators, detection of faults in photocopiers, such as paper jams, and vending machines. Miniature snap-action switches are frequently made use of in tamper switches on gate valves of fire sprinkler systems, in addition to other water piping systems. In this application, it is vital to be conscious of whether valve has been shut, or it is open. Combined Lego Motor Gearbox: Figure VIII There are DC motors that were provided in Lego kit. These motors are great for building robots in view of the fact that they are powerful and compact. They normally rotate at thousands of rotations per minute. Nevertheless, most electric motors are in actual fact lacking in torque. In other words, this can be attributed to the fact that they cannot push incredibly hard. If hooked directly up to the motor’s shaft, we can note that it can hardly rotate the wheel, let alone nudge a whole robot. Despite the fact that they have inadequate torque, what they do have in plenty, is speed. In reality, if the shaft is running freely, it can rotate at a rate of numerous thousands revolutions per minute. As a result, this speed is much faster than what one wants for a robot to drive in any case. Therefore, we could do with gearboxes with the intention of trading some of this unnecessary speed for additional torque. Figure IX The LEGO system is composed of a wide range of gears with varying functions (Brooks, 1986). On the other hand, for universal purposes, 8, 24, and 40-tooth gears can be employed. These are the easiest and most efficient to utilize of the group for the reason that their diameters are selected, such that they can be interlocked with one another at standard LEGO distances. Through gear reductions, one is able to translate speed into torque (or the other way round by application of this technique in reverse). Suppose an 8-tooth gear is employed in turning a 24-tooth gear. Given tha t the smaller gear is required to rotate three times in order to turn the large gear once, the axle with the 8-tooth gear spins faster than the other. As a result of this exchange for this reduction in speed, the axle is now able to apply three times as much torque. Consequently, this generates a gear reduction ratio of 3:1. This implies that we are relinquishing a factor of three of speed and swapping it over for production of three times the torque. Lego parts Figure X Each component of the LEGO has its work cut out for it (Overmars. 2000). A number of those components are available and are simply used to join two parts that are not able to be stick together with one another. A number of other parts, for instance rollers, are supposed to hook up the wheels with a few other parts of the robot with the intention of making the wheels move with mush ease. What is more, a number of parts are large in size, which could be utilized as the base of the robot; therefore, we could place man y parts on. In addition, they could be used to connect parts that are relatively far away in distance from each other. A good number of the components that we employed in the creation of our robot were the thick red bars and long red bars that assisted us in connection between the wheels. Into the bargain, we used the big bars that have a large area to make use of it as the base of our robot. Furthermore, we could include on those big bars with the broad areas handy board, the battery, and a number of small components that could furnish a better look to our robot. In addition, we made use of the linking parts to a large extent that is on grey to join the parts which we experienced a few difficulties in connecting them together. Assembly Part – (Name of team member who did this part) Grabbing Mechanism The hardest part of the whole project was finding a solution to the problem of grabbing flip over the puck. So as to come across a superior and realistic arm, we stumbled upon a possible like way out on the internet (Williamson, 1998). The ultimate form of the grabbing piece of equipment has two motors; the work of one of the motors was to spin the arm, while the other motor had to push the meteorite aside. Chassis The chassis had to have enough strong in order to give support to handy board, batteries, and all the other sensors that the robot needed. Figure XI Sensors (Name of team member who did this part) It is worth noting that sensors are the most significant components of the robot (â€Å"How to Make a Robot – Lesson 7: Using Sensors†, 2011). When robots have them, they are able to feel, look at and make out the disparity in their surroundings. To enable the robot to verify whether there existed a puck or meteorite in the vicinity of the loading area, we employed one blue led as well as one phototransistor. The purpose of the blue LED was to give off a light beam that would be used by the phototransistor. There are cases when the beam light would be broken; this means that a puck or meteorite is in the loading region. After verifying this and finding a puck in the region, the function of the second phototransistor was to verify the colour of the puck. Readings ranged from 50 to 185 for the red puck. On the other hand, readings were larger than 200 for blue puck. The function of the third phototransistor was to rummage around for the base light with the intention of finding a way back to the base. In case the indicated value was less than 10, this showed the correct direction to the base. An infra red (IR) emitter/detector was made use of with the purpose of determining the exact location of the base. In case the indicated value was higher than 236, then the location of the black line and subsequently, the location of the goal area was illustrated. In addition, the Infra red (IR) range finder was employed in the verification of the ultimate position of the goal area. Lastly, the 4 micro switches were used to †Å"feel† the obstacles as the robot moved around. Motors and the Motor drive mechanism As a result of restriction on the available materials and constituent parts of LEGO, the drive mechanism was made to order for two motors. Figure XII The steering mechanism of the robot was very heavy. The robot used big wheels at the front, and small ones at the rear. The option of making use of rear small wheels was attributed to minimising friction, as well as having a good manoeuvrability. The robot created had major strength; it was very robust. The robustness of the robot ensured that it continued to manoeuvre in every environment it was subjected to. Conclusion This project report has covered all the things the team worked on in the hope of producing a successful robot. In addition, the report also looked at the constituent parts that were used to create the robot, and how the team employed them with the aim of building a physically powerful and innovative robot that could not be easi ly damaged or broken. In addition to that, the project report offers a number of concise ideas in relation to the Interactive C (IC) program and the Handy board. The IC program was used to program the robot so that it could be able to perform the mission as the team wanted it to do. I believe that this activity was an extremely interesting experience. The fact that were could be responsible for creation of a robot that could do a fine job by holding a verifying, collecting and putting a puck in its rightful place as the required by the task. The only initial challenge we faced was the manner in which we could thrust the arms of the robot into the exact place, and how the team could make them turn. This was soon overcome and the team successfully completed the task. References Brooks. R.A. (1986) A robust layered control system for a mobile robot. IEEE Journal of Robotics and Automation, RA-2:14–23. â€Å"How to Make a Robot – Lesson 7: Using Sensors.† (2011) [WW W] Go Robotics. Availalble from  https://www.robotshop.com/community/blog?page=1 . Jones, J.L., Flynn, A. M. and Seiger, B.A., 1999. Mobile Robots: Inspiration to Implementation. Massachusetts: A K Peters, Ltd. Martin, F.G., 2001. Robotic Explorations: a Hands-on Introduction to Engineering. Massachusetts: Prentice Hall. Martin, F.G.,1994. Circuits to Control: Learning Engineering by Designing LEGO Robots, doctoral dissertation, Program in Media Arts and Sciences, Massachusetts Inst. of Technology, Cambridge, Mass. McKerrow, P.J., 1993. Introduction to Robotics. Boston: Addison-Wesley. Overmars, M., 2000. Lego robots tips and tricks. [WWW] Web. Papert S. and Harel, I. eds.,1991. Constructionism. Westport, Conn.: Ablex. Sutton, R.S. and Barto, A.G.,1998. Reinforcement Learning: An Introduction. Cambridge, Mass.: The MIT Press. Williamson, B., 1998. The Lego: FetchBot. [WWW] Freelug. Available from  http://perso.freelug.org/benw/fetchbot/index.html . This report on Meteorite or Puck Hunt: Autonomous Mobile Robot was written and submitted by user 3-D Man to help you with your own studies. You are free to use it for research and reference purposes in order to write your own paper; however, you must cite it accordingly. You can donate your paper here.

Thursday, March 12, 2020

Criticisms

and not reality. In this sense, Kant sees the Ontological argument as an exercise in verbal analysis, the means where anyone can anaylse the meaning of a word or concept, and draw a logical explanation from it. Therefore, Anselms’ word... Criticisms Free Essays on The Existence Of God - Approaches/Criticisms The existence of God - Approaches/Criticisms There are three major arguments that attempt to explain the existence of God. Firstly, it is important to establish a definition of God. According to philosophers God is an infinitely perfect being that upholds a divine unity of ultimate goodness and of ultimate power. God is referred to as Omniscient, Omnipotent and Eternal. God has unlimited knowledge and intelligence, so basically God is the ultimate model of perfectionism. Though all Philosophers agree with this definition of God, it does not state whether or not this ideal concept of God exists. The Ontological, Cosmological and Teleological have been developed throughout time to attempt to prove God existence. There have also been many criticisms into these arguments, which attempt to disprove each argument. The Ontological argument was developed by Anselm; a theist who argued for the existence of God. In his argument he refers to God as a perfect being, therefore ‘that than which nothing greater can be conceived’. He began his argument by saying that even a ‘fool’ (atheist) can grasp or understand the concept of a being than of ‘which nothing greater can be conceived’ as they already have an understanding or idea of what it means in their mind. Though this idea exists in their mind, it does not mean God doesn’t exist in reality. Anselm refers to God as a perfect being, and because he is so perfect he must have infinite perfectionism, therefore Anselm is arguing that if God lacked existence he would not be perfect, as he is perfect he must exist. There are many criticisms to why Anselm’s Ontological argument fails. Kant saw Anselm’s argument as merely a word game, playing on words and not reality. In this sense, Kant sees the Ontological argument as an exercise in verbal analysis, the means where anyone can anaylse the meaning of a word or concept, and draw a logical explanation from it. Therefore, Anselms’ word...

Monday, February 24, 2020

The Giver by Lois Lowry Essay Example | Topics and Well Written Essays - 500 words

The Giver by Lois Lowry - Essay Example Theirs is a rigidly controlled society where there is no suffering, hunger, war and also no color, sex, music or love. The â€Å"Elders† controls everything like who will become husband and wife, the son and daughter they will receive to take care of and the job to be assigned at the proper time which is at twelve years of age. A person can be released from the community if he is really old, a sick infant or those persons who break the rules. Jonas discovers after a year of training that people being released were actually being given lethal injection. Jonas was angered by such discovery so he, together with the Giver, devised a plan of escape for Jonas together with Gabriel, the sick baby who is to be released through lethal injection the next day. But then, their plan did not work out. In trying to escape, Jonas experience so much hardships and starvation. The reader is left to interpret it the way he looks at how the story ended. Being a book critic, he said that he likes the book because it could entertain the reader. He gave as example the way Jonas first experience happiness, pain and sadness. According to him it’s funny at how Jonas felt simple things like seeing and feeling snow and feeling the warmth of the sun turn incredible for him. He also wanders what love is when given the memory of love by the Giver who told him that it’s his favorite emotion. Another instance is when Jonas wonders hoe life in his world will be if it is filled with colors and memories and emotion. This critic also said that to show true emotion, the author showed a tearful Jonas when he found out that his father, a doctor, administers lethal injection to infants who are released from the community for being sick and weak. Because of this, he does not want to live with his father who is a killer. Another example is when Jonas begins to fall in love with Fiona, his friend whom he saw naked in his dream. The book also relays a good message saying that war is bad

Saturday, February 8, 2020

3 question for 2 case study Example | Topics and Well Written Essays - 1750 words

3 question for 2 - Case Study Example 21). Children Act 1989, section 47. The Act outlines the duty to enquire where there are grounds to believe that a child is being subjected to physical, emotional and sexual harm or neglect currently or in future. A89, section 44, local authorities or other concerned individuals to follow a court procedure to remove a child who is in immediate danger It stipulates that the child should remain in a safe place or access to a child is authorized where it is unreasonably denied. If Jamie is prone to immediate danger while living in Tim’s house, an Emergency Protection Order could be applied. This would take at least 8 days giving the local authority time to assess the situation and decide on how to protect Jamie. They may put him under foster care. Children Act 1989, Schedule 2 outlines the powers of local authorities to provide assistance in areas of finance, counselling and other services that might cut down on the effect of disability in a household. The Children Act 1989 contains an important principle of partnership. This means that social service providers must work in conjunction with the families to protect the child and closely with other institutions like schools. Family Law Act 1996, section 42 which provides for a re non-molestation order. Breach of this order is an offence. It also covers domestic violence protection and orders between sections 24 and 30 of the Crime and Security Act. This is relevant for Rose’s protection. She might seek a non-molestation order against Tim to stop him from assaulting her. Tim would be arrested if he breaches the order (Harris-Short, Miles, 2011, p. 257). Rose is being harassed by Tim and this brings up fear of violence. If Tim is charged he might be ordered to stay away from Rose and breach of this order would lead to arrest (Great Britain, 2014, p. 159). The Act Data Protection of 1998 and data protection principles,